Vermeer Logo

Bale Processors

BPX9000BPX9000

Simple, durable, versatile – the all-new BPX9000 from Vermeer combines the things you want and need in a bale processor. The easy to operate machine is built tough, produces even, consistent feed with minimal maintenance, and the optional large square bale kit offers the versatility you need. Blow away dust and mold from the bale, and feed evenly into a bunk or spread up to 40’ (12.19m). The BPX9000 is built to do the job with the Vermeer quality you expect.


Length 15' 4.6m
Height 8.5' 2.6m
Width - Transport 8.2' 2.5m
Width - Operation 11.2' 3.4m
Weight 5060lbs 2295.2kg
Drawbar Weight 1460lbs 662.2kg
Horsepower Required 85hp 63.4kw
PTO speed 1000rpm
Hydraulics type 3- Double Acting
Hydraulic Pressure 2000psi 137.9bar
Hydraulic flow rate 8gpm 30.3L/min
Bale rotation 3 Roller Chains with Bolt-On Cross Slat
Bale size capacity Two Bales, 6 ' x 5 '
Bale weight capacity 2500lbs 1134kg
Discharge Direction Right Hand
Flail description 7/16 " x 5 9/16 " tempered spring
Flail Drum Diameter 26.8" 67.9cm
Flail Drum Length 78" 198.1cm
Flail Drum Speed 1000rpm
Flail Quantity 30
Hitch Jack 5000 lb. (2267.96kg)
Slug bar quantity 7
Slug bar adjustment Hand Lever with 5 settings
Tire Size - Standard 14L x 16.1FL
Torque Protection - Driveline Shear bolt
Flotation Tires 16.5L- 16.1SL 6 SOFTRAC II
Square bale kit Yes


Seffield Logo



Catapult CPX9000
CataPult CPX9000

The new Catapult CPX9000 bale processor is a machine that offers power, versatility and easy operation. The Catapult CPX9000 bale processor allows material to be thrown 60-100’ (20-30m), whether that be up and over feed bunks in a cattle operation or for land reclamation and erosion control purposes. Not only does the CPX9000 have the ability to throw forage material long distances, but it also gives operators control over where the material is thrown. Hydraulic controls make this machine easy to use, giving operators the ability to choose how the spout is angled and how the crop is distributed. The Catapult CPX9000 bale processor is available only at participating dealers.


Length 15.6' 4.8m
Height 10' 3m
Width - Transport 8.4' 2.6m
Width - Operation 19.8' 6m
Weight 7460lbs 3383.8kg
Drawbar Weight 2500lbs 1134kg
Horsepower Required 110hp 82kw
Horsepower maximum 210hp 156.6kw
PTO speed 1000rpm
Hydraulics type 2 - double acting
Hydraulic Pressure 2000psi 137.9bar
Hydraulic flow rate 15gpm 56.8L/min
Minimum Tractor Size 8310lbs 3769.4kg
Axle adjustment 12 " each axle
Bale rotation Optional square bale kit gives you the ability to process large square bales in addition to round bales.
Bale size capacity Two bales, 6 ' x 5 ' (1.8 x 1.5 m)
Bale weight capacity 2500lbs 1134kg
Blower Two 38.63 " blower fans (1500 rpm front & 1000 rpm rear)
Cut Control Bar Adjustment Hand lever with 5 settings
Cut Control Bar Quantity 7
Discharge Direction 260degrees
Flail description Hand lever with 5 settings
Flail Drum Diameter 26.8" 67.9cm
Flail Drum Length 78" 198.1cm
Flail Drum Speed 1000rpm
Flail Quantity 30
Hitch Jack 7000 lb (3157.15 kg)
Horizontal spread distance 100' 30.5m
Safety Chain Kit 7000 lb (3157.15 kg)
Spout Length 95.3' 29m
Spout Deflector 0° to 90° down
Spout Rotation 260degrees
Tire Size - Standard 16.5L-16.1SL
Torque Protection - Driveline Two shear hubs
Extra Cut Control Bars Kit Yes
Hydraulic Cut Control Bar Kit Yes


Seffield Logo



Final Cut FPX9000
Final Cut FPX9000

The Final CutTM FPX9000 bale processor from Vermeer allows you to process the amount of forage material you need, on your own time. Optimal cut-length for feeding cattle is achieved as material passes through multiple cut points. The Final Cut FPX9000 is readyfor windrow or bunk feeding, or processing material into a bunker or other storage item for mixing rations later. An optional powered side wall allows you to process round or square bales. Get the consistency, versatility and speed you need with the Vermeer Final Cut FPX9000 bale processor.


Length 15.8' 4.8m
Height 8.8' 2.7m
Width - Transport 8.4' 2.6m
Width - Operation 12' 3.7m
Weight 6340lbs 2875.8kg
Drawbar Weight 1940lbs 880kg
Horsepower Required 110hp 82kw
Horsepower maximum 210hp 156.6kw
PTO speed 1000rpm
Hydraulics type 3 - double acting
Hydraulic Pressure 2000psi 137.9bar
Hydraulic flow rate 10gpm 37.9L/min
Minimum Tractor Size 6227lbs 2824.5kg
Axle adjustment 12 " each axle
Bale rotation 3 roller chains with bolt-on cross slat
Bale size capacity Two bales, 6 ' x 5 ' (1.8 x 1.5 m)
Bale weight capacity 2500lbs 1134kg
Cut Control Bar Adjustment Hand lever with 5 settings
Cut Control Bar Quantity 7
Discharge Direction Right hand
Flail description Dual 1/4 " blade x 5 1/2 "
Flail Drum Diameter 26.8" 68.1cm
Flail Drum Length 78" 198.1cm
Flail Drum Speed 1500rpm
Flail Drum Quantity 60
Horizontal spread distance 40' 12.2m
Tire Size - Standard 14L x 16.1FL
Torque Protection - Driveline Shear bolt
High speed rotor flail description 3.6 " x 6 11/32 " reversible knives
High speed rotor flail quantity 60
High speed rotor diameter 22.2" 56.4cm
High speed rotor length 75.2" 191cm
High speed rotor speed 3000rpm
Hitch Jack 5000lbs 2268kg
Safety chain kit 10000lbs 4535.9kg


Seffield Logo

Bale Wrappers



SW2500
SW2500

The exclusive Vermeer SW2500 Silage Wrapper quickly surrounds your bales in protective plastic film, maintaining a high level of protein content. Your bale’s nutritional quality remains high, lowering the need to use protein additives. Handles bales up to 5'/1.5 m in diameter and 2,500 lbs/1136 kg.


Transport Length 12.1' 3.7m
Transport Height 7.3' 2.2m
Transport Width 6.3' 1.9m
Weight 1960 lbs (889 kg)
Hydraulic Type 1 - Double acting
Hydraulic Flow Rate - Minimum 4 gpm (15.1 L/min)
Pressure Setting 1500psi 103.4bar
Tire size 20.5 in x 8 in x 10 in (52 cm x 20.3 cm x 25.4 cm), 10 PR
Hitch Drawbar
Film Stretcher 55%
Bale Weight - Maximum 2500lbs 1134kg
Bale Size - Maximum 5 x 4 ft (1.5 m x 1.2 m) Round
Highway Lights Yes


Seffield Logo



SW5000
SW5000

Ideal for mid-sized operations, the SW5000 Silage Wrapper is designed to enhance operator conveniences and boost production output. A rugged, turning table spins the bale. Pre-stretched film tightly wraps the bale, sealing in important nutritional forages. And a heavy-duty turntable gently lowers the wrapped bale to the ground – ready for storage!


Transport Length 15.4' 4.7m
Transport Height 7.4' 2.3m
Transport Width 8.3' 2.5m
Weight 2600 lbs (1179 kg)
Hydraulic Type 1 - Single acting, return to tank
Hydraulic Flow Rate - Minimum 5 gpm (18 L/min)
Pressure Setting 2000psi 137.9bar
Tire size 10.0/70 x 15.3
Hitch Drawbar
Film Stretcher 55% or 70%
Bale Weight - Maximum 2200lbs 997.9kg
Bale Size - Maximum 5 x 4 ft (1.5 m x 1.2 m) Round


Seffield Logo



SW5500
SW5500

The SW5500 Silage Wrapper is designed to enhance operator conveniences and boost production output and is an ideal system for operations with extensive silage baling work. A rugged, turning table spins the bale. Pre-stretched film tightly wraps the bale, sealing in important nutritional forages. And a heavy-duty turntable, with special ground support bracing, gently lowers the wrapped bale to the ground – ready for storage!


Transport Length 19' 5.8m
Transport Height 9' 2.7m
Transport Width 7.4' 2.3m
Weight 4600 lbs (2087 kg)
Hydraulic Type 1 - Single acting, return to tank
Hydraulic Flow Rate - Minimum 5 gpm (18 L/min)
Pressure Setting 2000psi 137.9bar
Tire size 380/55 x 17
Hitch Drawbar
Film Stretcher 55% or 70%
Bale Weight - Maximum 3300lbs 1496.9kg
Bale Size - Maximum 5.2 ft x 5 ft (1.6 m x 1.5 m) Round
Bale End Tip Yes
Highway Lights Yes


Seffield Logo



BW5500
BW5500

This BW5500 inline bale wrapper from Vermeer is designed to give large volume hay operators and custom operators fast wrapping times and more operational control. The three plastic film pre-stretchers on the BW5500 helps increase wrapping speed over machines with only two pre-stretchers. A digital controller allows the operator to apply a consistent number of wraps on bales with automation that consistently adjusts the wrap settings for environmental variations.


Transport Length 18' 5.5m
Transport Height 9' 2.7m
Transport Width 8' 2.4m
Weight 5000 lbs (2268 kg)
Engine 13 HP or 20 HP Honda
Alternator 18Amp
Hydraulic Type Self-contained
Controls Digital Controller with LCD display
Tire size (2) 11L x 15 8 Ply; (2) 27 x 10.5 Traction
Hitch Drawbar
Steering Electric over Hydraulic Joystick
Film Stretcher (3) 30 in x 55%
Bale Alignment Fixed Bale Guides
Wrapping Capacity 120Bales/Hr
Hoop Speed Digital Controller Adjusted
Bale Size - Maximum 5.5 ft x 5 ft (1.7 m x 1.5 m) Round
Engine Start Electric
Remote Steer, Engine Start/Stop Yes
(3) LED Night Work Lights Yes
Discharge Guide Rollers Yes
Plastic Sensor Alert Yes
Spring Assisted Final Bale Pushoff Yes


Seffield Logo

Balers



404 Pro Silage
404 Pro Silage

Loaded with state-of-the-art features, the Vermeer 404 Pro Silage Baler is designed for fast, efficient silage baling to save you time while preserving the quality of your crop. The optional XtraCut17 crop cutter system increases bale density, accelerates fermentation, and improves silage quality and digestibility. Meanwhile, the exclusive HYDROFLEX Control lets the floor shift up and down to accommodate uneven swaths, minimizing rotor blockage. Plus, it’s easy to maneuver and easy to maintain.


Bale Diameter 49" 124.5cm
Bale Width 48" 121.9cm
Bale Weight 2300lbs 1043.3kg
Length (With Ramp) 188.4" 478.5cm
Height 102.4" 260.1cm
Width - Standard 111" 281.9cm
Weight (Fully Optioned) 7446lbs 3377.4kg
Drawbar Weight 1232lbs 558.8kg
Type of Chamber Fixed
Number of Rollers 18 total, 2 main drive and 16 driven rollers
Driveline 80 Degree CV, 540 PTO
Roller Chain Single 60, 80, and 100 and double 60 and 80
Torque Protection - Main Input Shaft Cutout clutch
Torque Protection - Pick-up Radial pin clutch
Bearing and Sprocket Configuration Round shafts, greasable roller bearings



504 Pro
504 Pro

The all-new 504 PRO Baler is built to handle the demands of heavy, wet material for frequent silage baling. The 5’ by 4’ variable chamber baler, with features such as the Xtracut17 chopper system and Hydroflexcontrol for handling heavy hay, comes standard with a wide pick-up and the all-new E-Link Pro monitor. Whether you’re baling silage, dry hay or a combination of both, the 504 PRO Baler offers the features and flexibility you need to produce high quality bales in a variety of materials.


Bale Diameter 60" 152.4cm
Bale Width 48" 121.9cm
Bale Weight 2400lbs 1088.6kg
Length (With Ramp) 196.1" 498.1cm
Height 108.7" 276cm
Width - Standard 111" 281.9cm
Weight (Fully Optioned) 8220lbs 3728.5kg
Drawbar Weight 1400lbs 635kg
Type of Chamber Variable
Idler Roller Size 9.6" 24.4cm
Width of Belt 11.2" 28.4cm
Number of Belts 4
Type of Lace Endless Belts
Length of Belt - Long 433.1" 1100.1cm


Seffield Logo



504N
504N

The Vermeer 504N is designed for high-production hay producers who want the speed, operating efficiency, functionality and reliability of the M Series … and great-looking, high-density bales in smaller 5' x 4' (1.5 m x 1.2 m) packages. It embodies the performance and latest technology of the larger Super M with many of the exclusive design features that placed the M Series model at the top of its class.


Bale Diameter 60" 152.4cm
Bale Width 47" 119.4cm
Bale Weight 1200lbs 544.3kg
Length - Standard 154" 391.2cm
Length (With Net) 175" 444.5cm
Length (With Ramp) 167" 424.2cm
Height 102" 259.1cm
Width - Standard 95" 241.3cm
Weight (Fully Optioned) 5168lbs 2344.2kg
Drawbar Weight 768lbs 348.4kg
Type of Chamber Variable
Drive Roller Size Two 4.5 " (11.4 cm) diameter, steel, with 1.5 " (3.8 cm) round bearings
Drum Roller Size 12 " (30.5 cm) with 1.8 " (4.5 cm) hex bearings
Start Roller Size 4.5" 11.4cm
Number of Plys 3-ply mini rough top
Width of Belt 6.8" 17.3cm
Number of Belts 6
Type of Lace Alligator Rivet
Length of Belt - Long 437" 1110cm
Length of Belt - Short 427" 1084.6cm


Seffield Logo



604 Super M
604 Super M

Bale hay and other forage crops with remarkable speed and reliability. The Vermeer 604 Super M baler has the features farmers need. Its direct crop feed is simple and compact for maximum efficiency. Other features like optional electronic bale monitoring with scales and moisture measurements, powered bale ramp and many more, make the 604 Super M a top seller.


Bale Diameter 72" 182.9cm
Bale Width 47" 119.4cm
Bale Weight 2000lbs 907.2kg
Length - Standard 166" 421.6cm
Length (With Net) 195" 495.3cm
Height 117" 297.2cm
Width - Standard 100" 254cm
Width (With Flotation Tires) 114" 289.6cm
Width (With Standard Tires and Scale) 106" 269.2cm
Width (With Flotation Tires and Scale) 115" 292.1cm
Weight (Fully Optioned) 7340lbs 3329.4kg
Drawbar Weight 1380lbs 626kg
Type of Chamber Variable
Drive Roller Size 5.5 " (14 cm) drive and idler
Drum Roller Size 12 " (30.5 cm) with 1.8 " (4.5 cm) hex bearings
Idler Roller Size 3.5" 8.9cm
Start Roller Size 4.5" 11.4cm
Number of Plys 3-ply mini rough top
Width of Belt 6.8" 17.3cm
Number of Belts 6
Type of Lace Alligator Rivet
Length of Belt - Long 540" 1371.6cm
Length of Belt - Short 533" 1353.8cm


Seffield Logo



604N
604N

Like all Vermeer products, the new 604N Vermeer balers are built to last. With a sleek new design, these balers may look different, but what hasn’t changed is the high-performance and reliability they have to offer. Boasting durable, heavy-duty components and the ability to perform at a high capacity, the 604N Vermeer baler works hard to help you run smoothly and efficiently.


Bale Diameter 72" 182.9cm
Bale Width 47" 119.4cm
Length - Standard 166" 421.6cm
Length (With Net) 195" 495.3cm
Length (With Ramp) 195" 495.3cm
Height 117" 297.2cm
Height - With Inline Ramp 129" 327.7cm
Width - Standard 100" 254cm
Width (With Flotation Tires) 115" 292.1cm
Width (With Standard Tires and Scale) 106" 269.2cm
Width (With Flotation Tires and Scale) 115" 292.1cm
Weight (Fully Optioned) 7960lbs 3610.6kg
Drawbar Weight 1500lbs 680.4kg
Type of Chamber Variable
Drive Roller Size 5.5 " (14 cm)
Drum Roller Size 12 " (30.5 cm) with 1.8 " (4.5 cm) hex bearings
Start Roller Size 4.5" 11.4cm
Number of Plys 3-Ply mini rough top
Width of Belt 6.8" 17.3cm
Type of Lace Alligator Rivet
Length of Belt - Long 540" 1371.6cm
Length of Belt - Short 522" 1325.9cm


Seffield Logo



604N Cornstalk Special
604N Cornstalk Special

It takes a rugged baler with heavy-duty components to withstand the tough conditions and tight timeframes of baling cornstalks. When it comes to durability and efficiency, the new Vermeer 604N Cornstalk Special baler is equipped to bale through even the toughest crop quickly and efficiently. With more heavy-duty components than its predecessor, it’s clear that the 604N Cornstalk Special offers unmatched productivity when baling cornstalks.


Bale Diameter 72" 182.9cm
Bale Width 47" 119.4cm
Length - Standard 195" 495.3cm
Height 117" 297.2cm
Height - With Inline Ramp 129" 327.7cm
Width (With Flotation Tires and Scale) 115" 292.1cm
Weight (Fully Optioned) 7960lbs 3610.6kg
Drawbar Weight 1500lbs 680.4kg
Type of Chamber Variable
Drive Roller Size 5.5
Drum Roller Size 12 " (30.5 cm) with 1.8 " (4.5 cm) hex bearings
Idler Roller Size 3.5" 8.9cm
Start Roller Size 4.5" 11.4cm
Number of Plys 3-Ply mini rough top
Width of Belt 6.8" 17.3cm
Number of Belts 6
Type of Lace Alligator Rivet
Length of Belt - Long 540" 1371.6cm
Length of Belt - Short 533" 1353.8cm
Driveline 80 degree CV, 1000 rpm
Roller Chain Single 50, 60, 80
Torque Protection - Main Input Shaft Cutout clutch
Torque Protection - Pick-up Friction with slip sensing
Bearing and Sprocket Configuration Hex shaft and bearings
PTO speed 1000rpm


Seffield Logo



605 Super M
605 Super M

Produce round bales in less time with less hassle when you use the 605 Super M Baler. Built for high-volume hay production, it offers the best in modern technology, including the exclusive Vermeer direct crop feed design, optional powered windguard, electronic bale monitoring, optional powered bale ramp and much more.


Bale Diameter 72" 182.9cm
Bale Width 61" 154.9cm
Bale Weight 2400lbs 1088.6kg
Length - Standard 166" 421.6cm
Length (With Net) 195" 495.3cm
Length (With Ramp) 195" 495.3cm
Height 117" 297.2cm
Width - Standard 114" 289.6cm
Width (With Flotation Tires) 128" 325.1cm
Width (With Standard Tires and Scale) 120" 304.8cm
Width (With Flotation Tires and Scale) 129" 327.7cm
Weight (Fully Optioned) 8300lbs 3764.8kg
Drawbar Weight 1650lbs 748.4kg
Type of Chamber Variable
Drive Roller Size 5.5 " (14 cm) drive and idler
Drum Roller Size 12 " (30.5 cm) with 1.8 " (4.5 cm) hex bearings
Idler Roller Size 3.5" 8.9cm
Start Roller Size 4.5" 11.4cm
Number of Plys 3-ply mini rough top
Width of Belt 6.8" 17.3cm
Number of Belts 8
Type of Lace Alligator Rivet
Length of Belt - Long 540" 1371.6cm
Length of Belt - Short 533" 1353.8cm


Seffield Logo



605 Super M Cornstalk Special
605 Super M Cornstalk Special

Baling cornstalks is as easy as baling hay with the Vermeer 605 Super M Cornstalk Special Baler. Engineered specifically to gather bulky cornstalks and roll them into a tight bale, this workhorse carries the same technological advancements that have made Vermeer round balers top sellers in the industry: powered windguard, electronic bale monitoring, powered bale ramp and more. And now picking up your cornstalk bales is even easier with the optional Inline Ramp. The Inline Ramp positions the bales so you can pick them up along the rows without the need to drive over rows, ridges and cornstalks – helping save time in the field and making the process smoother.


Bale Diameter 72" 182.9cm
Bale Width 61" 154.9cm
Length - Standard 195" 495.3cm
Height 117" 297.2cm
Height - With Inline Ramp 129" 327.7cm
Width (With Flotation Tires and Scale) 129" 327.7cm
Weight (Fully Optioned) 8600lbs 3900.9kg
Drawbar Weight 1650lbs 748.4kg
Type of Chamber Variable
Drive Roller Size 5.5
Drum Roller Size 12 in. (30.5 cm) with 1.8 in. (4.5 cm) hex bearings
Idler Roller Size 3.5" 8.9cm
Start Roller Size 4.5" 11.4cm
Number of Plys 3-Ply mini rough top
Width of Belt 6.8" 17.3cm
Number of Belts 8
Type of Lace Alligator Rivet
Length of Belt - Long 540" 1371.6cm
Length of Belt - Short 533" 1353.8cm


Seffield Logo



605N
605N

Like all Vermeer products, the new 605N Vermeer balers are built to last. With a sleek new design, these balers may look different, but what hasn’t changed is the high-performance and reliability they have to offer. Boasting durable, heavy-duty components and the ability to perform at a high capacity, the 605N Vermeer baler works hard to help you run smoothly and efficiently.


Bale Diameter 72" 182.9cm
Bale Width 61" 154.9cm
Length - Standard 195" 495.3cm
Height 117" 297.2cm
Height - With Inline Ramp 129" 327.7cm
Width (With Flotation Tires and Scale) 129" 327.7cm
Weight (Fully Optioned) 8600lbs 3900.9kg
Drawbar Weight 1650lbs 748.4kg
Type of Chamber Variable
Drive Roller Size 5.5
Drum Roller Size 12 in. (30.5 cm) with 1.8 in. (4.5 cm) hex bearings
Idler Roller Size 3.5" 8.9cm
Start Roller Size 4.5" 11.4cm
Number of Plys 3-Ply mini rough top
Width of Belt 6.8" 17.3cm
Number of Belts 8
Type of Lace Alligator Rivet
Length of Belt - Long 540" 1371.6cm
Length of Belt - Short 533" 1353.8cm


Seffield Logo



605N Cornstalk Special
605N Cornstalk Special

It takes a rugged baler with heavy-duty components to withstand the tough conditions and tight timeframes of baling cornstalks. When it comes to durability and efficiency, the new Vermeer 605N Cornstalk Special baler is equipped to bale through even the toughest crop quickly and efficiently. With more heavy-duty components than its predecessor, it’s clear that the 605N Cornstalk Special offers unmatched productivity when baling cornstalks.


Bale Diameter 72" 182.9cm
Bale Width 61" 154.9cm
Length - Standard 195" 495.3cm
Height 117" 297.2cm
Height - With Inline Ramp 129" 327.7cm
Width (With Flotation Tires and Scale) 129" 327.7cm
Weight (Fully Optioned) 8600lbs 3900.9kg
Drawbar Weight 1650lbs 748.4kg
Type of Chamber Variable
Drive Roller Size 5.5
Drum Roller Size 12 in. (30.5 cm) with 1.8 in. (4.5 cm) hex bearings
Idler Roller Size 3.5" 8.9cm
Start Roller Size 4.5" 11.4cm
Number of Plys 3-Ply mini rough top
Width of Belt 6.8" 17.3cm
Number of Belts 8
Type of Lace Alligator Rivet
Length of Belt - Long 540" 1371.6cm
Length of Belt - Short 533" 1353.8cm


Seffield Logo



Rancher 6640
Rancher 6640

The Vermeer Rancher Balers are right-sized, right-priced and just right for your ranch. Designed for big bale performance and sensible budgets, the Rancher 6640 Baler produces larger-diameter round bales that can be easily moved and fed. And now, the next generation of Rancher Balers from Vermeer is here. With standard flotation tires (31x13.5L-15) and radial pin pickup clutch, the Rancher 6640 Baler is right for your ranch.


Bale Diameter 66" 167.6cm
Bale Width 47" 119.4cm
Bale Weight 1300lbs 589.7kg
Length - Standard 160" 406.4cm
Length (With Net) 181" 459.7cm
Length (With Ramp) 171" 434.3cm
Height 111" 281.9cm
Width - Standard 95" 241.3cm
Weight (Fully Optioned) 5220lbs 2367.8kg
Drawbar Weight 760lbs 344.7kg
Type of Chamber Variable
Drive Roller Size Two 5.5 " (14 cm) diameter steel with 1.9 " (4.9 cm) round bearings
Drum Roller Size 12 " (30.5 cm) with 1.8 " (4.5 cm) hex bearings
Idler Roller Size 3.5" 8.9cm
Start Roller Size 4.5" 11.4cm
Number of Plys 3 ply mini rough top
Width of Belt 6.8" 17.3cm
Number of Belts 6
Type of Lace Alligator Rivet
Length of Belt - Long 492" 1249.7cm
Length of Belt - Short 482" 1224.3cm


Seffield Logo



Rancher 6650
Rancher 6650

The Vermeer Rancher Balers are right-sized, right-priced and just right for your ranch. Designed for big bale performance and sensible budgets, the Rancher 6650 Baler produces larger-diameter round bales that can be easily moved and fed. And now, the next generation of Rancher Balers from Vermeer is here. With standard flotation tires (31x13.5L-15) and radial pin pickup clutch, the Rancher 6650 Baler is right for your ranch.


Bale Diameter 66" 167.6cm
Bale Width 61" 154.9cm
Bale Weight 1700lbs 771.1kg
Length - Standard 160" 406.4cm
Length (With Net) 181" 459.7cm
Length (With Ramp) 171" 434.3cm
Height 111" 281.9cm
Width - Standard 109" 276.9cm
Weight (Fully Optioned) 5850lbs 2653.5kg
Drawbar Weight 800lbs 362.9kg
Type of Chamber Variable
Drive Roller Size Two 5.5 " (14 cm) diameter steel with 1.9 " (4.9 cm) round bearings
Drum Roller Size 12 " (30.5 cm) with 1.8 " (4.5 cm) hex bearings
Idler Roller Size 3.5" 8.9cm
Start Roller Size 4.5" 11.4cm
Number of Plys 3 ply mini rough top
Width of Belt 6.8" 17.3cm
Number of Belts 8
Type of Lace Alligator Rivet
Length of Belt - Long 492" 1249.7cm
Length of Belt - Short 482" 1224.3cm


Seffield Logo



Rebel 5420
Rebel 5420

The Rebel Baler is designed for hard-working, independent operators who have a sharp eye for great values. These folks like to roll their own bales, on their own time, on their own schedule, using lower horsepower tractors. These smaller 60" (152 cm) diameter balers offer the perfect balance of simplicity, convenience and long-term reliability for the rural lifestyle customer.


Bale Diameter 60" 152.4cm
Bale Width 47" 119.4cm
Bale Weight 1000lbs 453.6kg
Length - Standard 150" 381cm
Length (With Net) 171" 434.3cm
Length (With Ramp) 167" 424.2cm
Height 102" 259.1cm
Height - With Inline Ramp 95" 241.3cm
Weight (Fully Optioned) 4700lbs 2131.9kg
Drawbar Weight 680lbs 308.4kg
Type of Chamber Variable
Drive Roller Size Two 5.5 " (14 cm) diameter steel with 1.94 " (4.9 cm) round bearings
Drum Roller Size 12 " (30.5 cm) with 1.8 " (4.5 cm) hex bearings
Idler Roller Size 3.5" 8.9cm
Start Roller Size 4.5" 11.4cm
Number of Plys 3 ply mini rough top
Width of Belt 6.8" 17.3cm
Number of Belts 5
Type of Lace Alligator Rivet
Length of Belt - Long 437" 1110cm
Length of Belt - Short 427" 1084.6cm


Seffield Logo



Rebel 5520
Rebel 5520

The Rebel Baler is designed for hard-working, independent operators who have a sharp eye for great values. These folks like to roll their own bales, on their own time, on their own schedule, using lower horsepower tractors. These smaller 60" (152 cm) diameter balers offer the perfect balance of simplicity, convenience and long-term reliability for the rural lifestyle customer.


Bale Diameter 60" 152.4cm
Bale Width 61" 154.9cm
Bale Weight 1400lbs 635kg
Length - Standard 150" 381cm
Length (With Net) 171" 434.3cm
Length (With Ramp) 167" 424.2cm
Height 102" 259.1cm
Weight (Fully Optioned) 5320lbs 2413.1kg
Drawbar Weight 760lbs 344.7kg
Type of Chamber Variable
Drive Roller Size Two 5.5 " (14 cm) diameter steel with 1.94 " (4.9 cm) round bearings
Drum Roller Size 12 " (30.5 cm) with 1.8 " (4.5 cm) hex bearings
Idler Roller Size 3.5" 8.9cm
Start Roller Size 4.5" 11.4cm
Number of Plys 3-ply mini rough top
Width of Belt 6.8" 17.3cm
Number of Belts 7
Type of Lace Alligator Rivet
Length of Belt - Long 437" 1110cm
Length of Belt - Short 427" 1084.6cm


Seffield Logo

Disc Mowers



5040
5040

With a 6' 9"/2.1 m cutting width, the 5040 disc mower is designed to cut acre after acre with minimal maintenance. The exclusive Vermeer bi-shaft design provides each disc with its own set of gears, bearings and lubricants – and the gears stay in the grease, even when mowing at angles. Extra wide skid shoes eliminate pinch points to protect against rock damage and simplify blade replacement.


Transport Width 94" 238.8cm
Transport Length 78" 198.1cm
Hitch 3-pt., Category II
Drive 540 rpm PTO
Drawbar Horsepower 45hp 33.6kw
Hydraulic requirements 1 single acting valve
Flow Rate 6gpm 22.7L/min
Hydraulic Pressure 1700psi 117.2bar


Seffield Logo



6040
6040

The 6040 disc mower is loaded with features that help reduce maintenance and promote long life. It powers through every mowing job with its 7'10"/2 m cutting width and exclusive bi-shaft design. Each disc has its own set of gears, bearings and lubricants. Extra wide skid shoes eliminate pinch points to protect against rock damage and simplify blade replacement.


Transport Width 94" 238.8cm
Transport Length 78" 198.1cm
Hitch 3-pt., Category II
Drive 540 rpm PTO
Drawbar Horsepower 60hp 44.7kw
Hydraulic requirements 1 single acting valve
Flow Rate 6gpm 22.7L/min
Hydraulic Pressure 1700psi 117.2bar
Cutting Width 94" 238.8cm
Number of Discs 6
Disc Type Quick -Clip
Number of Knives 12
Angle Adjustment Top-link on 3-pt.
Drive PTO to V-belt to gearbox/cutterbed
Warranty One year limited warranty and three year limited cutterbar warranty


Seffield Logo



7040
7040

The Vermeer 7040 disc mower delivers high performance with minimal maintenance. Exclusive bi-shaft design provides each disc with its own set of gears, bearings and lubricants – and the gears stay in the grease, even when mowing at angles. Extra wide skid shoes eliminate pinch points to protect against rock damage and simplify blade replacement. Seven discs mow a width of 9'2"/2.8 m with each pass.


Transport Width 94" 238.8cm
Transport Length 78" 198.1cm
Hitch 3-pt., Category II
Drive 540 rpm PTO
Drawbar Horsepower 70hp 52.2kw
Hydraulic requirements 1 single acting valve
Flow Rate 6gpm 22.7L/min
Hydraulic Pressure 2000psi 137.9bar
Cutting Width 110" 279.4cm
Number of Discs 7
Disc Type Quick -Clip
Number of Knives 14
Angle Adjustment Top-link on 3-pt.
Drive PTO to V-belt to gearbox/cutterbed
Warranty One year limited warranty and three year limited cutterbar warranty


Seffield Logo



8040
8040

Cutting 10' 6"/3.2 m swaths to make short work of any landscape, the Vermeer 8040 disc mower features the exclusive tri-shaft design for long-lasting performance. Each disc is self-contained with its own set of gears, bearings and lubricants – and the gears stay in the grease, even when mowing at angles. Extra wide skid shoes eliminate pinch points to protect against rock damage and simplify blade replacement.


Transport Width 94" 238.8cm
Transport Length 78" 198.1cm
Hitch 3-pt., Category II
Drive 540 rpm PTO
Drawbar Horsepower 80hp 59.7kw
Hydraulic requirements 1 single acting valve
Flow Rate 6gpm 22.7L/min
Hydraulic Pressure 2000psi 137.9bar
Cutting Width 126" 320cm
Number of Discs 8
Disc Type Quick -Clip
Number of Knives 16
Angle Adjustment Top-link on 3-pt.
Drive PTO to V-belt to gearbox/cutterbed
Warranty One year limited warranty and three year limited cutterbar warranty


Seffield Logo


Price, if shown, is Manufacturer's Suggested Retail Price(MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.


© 2016 Piedmont Power